Iris Innovations IRISx460, Quick Start Manual, Page: 14 / 20

Iris Innovations
Network Config (continued...)
UPnP Config: Configure UPnP protocol settings.
P2P Config: Configures Peer to Peer connections. Also
displays QR Codes to download a generic F.O.C IP
camera viewer App and the uniques configuration to
enable the camera to connect to a third party VPN host for
remote viewing, which can be accessed from the App (see
below).
Code Config
The code config window is where camera resolution,
refresh rate, bit rate control etc are set. Both streams can
be configured independently.
Alarm Config
The IRIS460 supports motion recording and scheduled
recording.
For Motion Detection, you define the areas of the screen
you wish to become ‘alarmed’ by drawing boxes as
desired in the Alarm/Motion window. Subsequently, when
motion is detected within these boxes, the camera enters
alarm state and begins recording to the path defined in
LOCAL SETTINGS.
Use mouse (or touch-screen) to ‘draw’ motion alarm
zones.
Scheduled Recording lets you define at which time and on
which days the camera records, as shown below.
IRISx460 User Guide v2.3 April 2021
14