Iris Innovations IRISx460, Quick Start Manual

Page: 6 / 20

Iris Innovations
Camera Overview
The diagram below details the various parts of your
camera:
Warning!
Camera Installation Sequence
The diagram below shows the sequence in which the
camera parts are fit into place during installation...
Warning!
It is strongly advised that the camera is powered up
and connected to a monitor / computer to check the
desired field of view prior to fixing the camera in
place.
Iris do not accept any liability if the camera is
installed and does not cover desired field of view.
1. Fit Base
2. Slide camera cable through base
3. Set desired camera field of view
4. Slide Cowling over inner dome onto base
5. Tighten Grub Screws
IRISx460 User Guide v2.3 April 2021
6
Inner Dome
Lens
Photo-Diode
(Light Sensor)
Infra Red LEDs
Cowling
Lock Screw
(in 2 positions)
Base
TO AVOID DAMAGE TO THE CAMERAS PAINTWORK
WHICH COULD RESULT IN EROSION TO THE
HOUSING, ENSURE THE GRUB SCREWS ARE FULLY
LOOSENED BEFORE MAKING ANY POSITIONAL
ADJUSTMENTS TO THE INNER DOME.
FAILURE TO DO SO WILL INVALIDATE ANY
WARRANTY CLAIM IF THE PAINTWORK IS
SCRATCHED OR DAMAGED.
FULLY LOOSEN PRIOR TO
ADJUSTING INNER DOME POSITION
(BOTH SIDES OF CAMERA)