QPSK/IP DEMODULATOR
Keypad
Figure 4.2 Keypad of This equipment-x series
The 6 keys on the front panel allow you to navigate in the information given on the LCD and to
change parameters, when the device operates under local control.
The
<ENTER>-key
is used to enter the main menu or a sub-menu. When you stand on the
preferred menu,
<ENTER>
is used to active the parameter on the bottom line and allows you to
change the value. It also finishes the input of new alphanumeric values and confirms the
changes.
The < >-and< >-keys are used to select between the main menus or sub-menus or programs.
When you stand on the preferred menu and the parameter is active, they are also used to
change the numerical values. Selecting a digit with the < >-and < >-keys.
The
<EXIT>-key
, is used to exit a menu without any action.
Common Interface
There are two Common Interface slots. You can insert up to two different CAM modules for
descrambling.
REAR PANEL
Figure 5.1 Rear Panel of This equipment-x Series
B1
TS/IP Input/Output interface
B2
XRL L interface
B3
XRL R interface
B4
RGB/YUV interface (G/Y)
B5
RGB/YUV interface (B/U)
B6
RGB/YUV interface (R/Y)
B7
CVBS2 Output interface
B8,B18
ASI2/SDI output interface
B9, B19
ASI1 output interface
B17
ASI input interface
7
