IRENIS EMU-8110 MPEG-2
Encoder User’s Manual
43 / 46
configuration permanently, it is required to operate through “Remote Save” on the toolbar
explained in 4.2.7.
This is the difference between “Set” and “Remote Save”.
4.4.2 IP Modification
Users can click
Operate
and select
Modify IP
in the drop-down list, and a dialog box
presents itself as shown below. Users input the new NMS IP Address for the device and click
OK button to confirm.
Users can then note the indicator light turns red, which signifies the equipment has
disconnected. Users then can refer to below prompts to edit the property by inputting the new
IP to re-connect the equipment.
