IRENIS EMU-8110 MPEG-2
Encoder User’s Manual
22 / 46
3.2.3.1 IP Out Enable
This is the new function of this EMU-8110 encoder, user can decide whether to open the IP
output function by press the ENTER key in this menu, and the operating interface will show
the following page:
► 3.1 IP out Enable
[ YES] NO
3.2.3.2 IP Out Address
If users enable the IP output function, then users can set the device IP output address in this
interface. After users press the ENTER key, the operating interface will display the following
page:
► 3.2 IP Out Address
224.002.002.002
3.2.3.3 IP Out Port
In this menu, users can set the encoder IP output port number by press the ENTER key to
enter the main editing interface.
► 3.3 IP Out Port
01001
3.2.3.4 Trans Stream ID
Users can set the device TS ID in this interface after pressing the ENTER key to enter the
main editing page.
► 3.4 Trans Stream ID
00000
3.2.3.5 Output Stream
Users can modify the bit rate of output stream in this interface after pressing the ENTER key
to enter the main editing page.
