IRENIS EMU-8110 MPEG-2
Encoder User’s Manual
34 / 46
In this field, users can decide whether to effect the NIT insertion function.
MPTS Filter Null Packet
If this function is effected, then the null packets in IP output stream will be filtered.
PSI/SI Editor
This button will trigger the PSI/SI Editor for some users’ advanced usage. For more detail,
please refer to the manual of PSI/SI.
4.3.1.1 Video Parameters
NOTE:
1.
Bit Rate Mode & Max Video Bit-rate
Users can only modify the Max Video Bit Rate when the Bit-rate mode is VBR, while CBR
mode is selected, Max Video Bit Rate box turns gray and users can just check it.
Input channel selection area. The interface and
setting principle of each channel are the same.
User can set
the mode or
type of each
item
by
clicking
the
Radio
Box
under
the
corresponding
item.
User can set
the standard
or format of
each item in
this area by
clicking the
pull-down
trigger.
User can set the parameters of the
video brightness, contrast, saturation,
and Hue by moving respective slider.
Figures at the beginning and end
indicate the adjustment range.
