Author: RRi
Page - 17 -
Version 1.3
Date: 10-2019
BLANKOM-HDM-4230_User_Manual_ENv1.3.docx
MPEG2/4 HD-SDI to QAM and IP Encoder User Manual
Example to pass the EIT Table from the ASI Input to the new multiplexed output see above,
ADD PID 0x0012 (hex) (= PID 18 dec).
Selcting a Service in the ASI will popup its information which can be edited:
With the Multiplex function you can add the encoded Services to an existing transport stream coming in
from ASI and push that out to ASI 1+2 and in parallel to an MPTS output. Be careful to set the Bitrate for
the CBR MPTS output accordingly. Encoder bitrates 1…4…8 + incoming data rate from ASI IN +
approximately 15% overhead to avoid peaks in the variable services bitrates disturbing all of the output
services. Maximum ASI-out net output rate = 213 Mb/s.
