Author: RRi
Page - 10 -
Version 1.3
Date: 10-2019
BLANKOM-HDM-4230_User_Manual_ENv1.3.docx
MPEG2/4 HD-SDI to QAM and IP Encoder User Manual
Chapter 3 WEB Interface Setup
The user can control this device and setup the configuration by a computer connected to
the device to its web NMS Port. The user should ensure that the computer’s IP address is
different from the other device’s IP address, otherwise, it would cause IP conflicts.
3.1 Encoder login
The default IP address of this device is 192.168.0.136 -> Please check the front panel LC
Display and change to Network by UNLOCK the Keypad with pressing LOCK-Key once than
MENU and use the arrow keys to navigate and ENTER Key to access the submenus. You
can always return back by MENU-Key. These pictures are from another device but similar
and shown as examples:
Select - change
-> ENTER
change IP address
of the GbE DATA Port to your needs
SAFE it please.
CONFIRM it.
For some values, a reboot should be considered to enable the settings and take effect.
Almost all of the needed settings can be accessed by the Front panel w/o Web-IF. The Menu
structure is nearly self-explaining.
