BLANKOM HDE-4K5 User Manual
Version 1.0 – 12-2018
Page - 5 -
techn. data are subject to change w/o notice!
The encoder can be always set back to factory default settings by using the RESET-switch in Web-IF or the button at
the front.
A few words about Network settings and VLC
– Player on a PC/Laptop.
Usually the default IP settings should be changed according to your local network.
If you have i.e. a company network structure with multiple subnet’s like
A:
-
192.168.0.1 (Gateway example a Fritzbox –DSL Router)
-
Netmask 255.255.255.0
-
DHCP enabled, or your IP Range for static IP Addresses are 192.168.0.100 - 250
B:
-
192.168.1. … and so on…
You should configure the network port of the Encoder to your preferred network by using a static and FREE IP
address. Avoid collision’s please !!!
If you use the default settings and cannot receive the encoded streams in your device by VLC, please make sure,
your network card doesn’t have 2 IP addresses manually setup:
VLC
cannot
gather
via which of
your IP addresses it should receive
the stream. This can be forced by
setting your METRIC Values
accordingly and/or configure
appropriate routes
