BLANKOM HDE-4K5 User Manual
Version 1.0 – 12-2018
Page - 10 -
techn. data are subject to change w/o notice!
Installation Guide
Accessories
When you open the package of the device, it is recommended to check delivered items according to the packing
list. Normally it should include the following items:
HDE-4K5 Encoder 1 pcs
User’s Manual
(usually via download PDF from Blankom.de)
1 pcs
Power Supply with 110…230VAC - 5VDC 2A with Euro plug 1 pcs
USB-cable 1 pcs
Some models will have Audio-Chinch – 3.5mm jack and/or HDMI cable in the box
Installation Preparation
When users install device, please follow the below steps. The details of installation will be described at the rest part
of this chapter. You can also refer rear panel chart during the installation.
IMPORTAND NOTE:
Please connect your PC/Laptop and the Encoder(s) always to the Ethernet with a GbE auto-negotiation
Switch (10/100/1000BaseT) or fixed 1GbE switches - if both devices are supporting that speed in between.
Please do not use PoE Switches. Otherwise you might damage either your laptop or the encoder RJ45 port
or at least get connection problems.
Assure that your switch doesn’t do Multicast-blocking on the ports you connect it – if you use UDP/RTP
multicasts.
Please
use High-Speed HDMI Cables
to secure UHD-Content support. DVI to HDMI Adapter do not support
Audio, so an external Audio from the sound-card output can be used (Analog Stereo)
