iReliev Plus Pain Relief & Recovery ET-8080, Instruction Manual

Page: 25 / 36

www.iReliev.com 25
Information About Electromagnetic Compatibility (EMC)
• The iRenew™ Plus Pain Relief and Recovery System is designed to be used in typical approved environments in
accordance with the safety standard EMC EN60601-1-2.
• The iRenew™ Plus Pain Relief and Recovery System is designed to support anticipated disturbances originating
from electrostatic discharge, magnetic fi elds for the power supply, or radio frequency emitters.
• However it is not possible to guarantee that the stimulator will not be affected by powerful RF fi eld (radio
frequency) originating from other sources.
ELECTROMAGNETIC COMPATIBILITY
• The device complies with current specifi cations with regards to electromagnetic compatibility and is suitable for
use in all premises, including those designated for private residential purposes.
• The radio frequency emissions of the device are extremely low and in all probability do not cause any interference
with other devices in the proximity.
• It is recommended that you do not place the device on top of or close to other electronic devices.
• Should you notice any interference with other electrical devices, move the device as radio equipment may affect
the operation of this device.
ELECTROMAGNETIC COMPATIBILITY INFORMATION
Table 1 Recommended separation distances between
portable and mobile RF communications equipment and the ME equipment
The iRenew™ Plus Pain Relief & Recovery System is intended for use in an electromagnetic environment in which radiated RF dis-
turbances are controlled. The customer or the user of the system can help prevent electromagnetic interference by maintaining a
minimum distance between portable and mobile RF communications equipment (transmitters) and the iRenew™ Plus Pain Relief &
Recovery System as recommended below, according to the maximum output power of the communications equipment.
There are a number of technical symbols on your iReliev ® device explained as follows: