ircon Modline 4, Installation And Operation Manual

Page: 11 / 88

Section 1 — INTRODUCTION
Seven standard series are identi-
fied by this two-digit block. See
Table 1.1 for characteristics of
each series.
2 2 = 22 Series (8 to 14 µm)
4 3 = 43 Series (3.43 ±0.07 µm)
4 4 = 44 Series (8 to 14 µm)
4 5 = 45 Series (3.7 to 4.0 µm)
4 6 = 46 Series (2.0 to 2.6 µm)
4 7 = 47 Series (4.8 to 5.2 µm)
4 8 = 48 Series (7.5 to 8.5 µm)
22 or 44 SERIES
0 2 F = 00 0 to 0 200°F
0 5 F = 00 0 to 0 500°F
1 0 F = 00 0 to 1000°F
0 1 C = 00 0 to 0 100°C
0 2 C = 00 0 to 0 250°C
0 6 C = 00 0 to 0 600°C
45 SERIES
1 5 F = 500 to 1500°F
2 5 F = 500 to 2500°F
0 8 C = 300 to 0 800°C
1 3 C = 300 to 1300°C
46 SERIES
1 0 F = 500 to 1000°F
1 4 F = 600 to 1400°F
0 6 C = 250 to 0 600°C
0 8 C = 350 to 0 800°C
47 SERIES
1 0 F = 200 to 1000°F
1 5 F = 500 to 1500°F
2 5 F = 500 to 2500°F
0 6 C = 100 to 0 600°C
0 8 C = 300 to 0 800°C
1 3 C = 300 to 1300°C
43 SERIES
0 4 F = 120 to 0 400°F*
0 6 F = 200 to 0 600°F
1 0 F = 300 to 1000°F
0 2 C = 0 50 to 0 200°C*
0 4 C = 100 to 0 400°C
0 5 C = 150 to 0 500°C
*Restrictions:
Case operating temperature range
50 to 113°F (10 to 45°C);
Sudden ambient temperature change
(up or down) of 10°C (18°F) will
cause noticeable errors until the
instrument temperature stabilizes.
Minimum response time setting
10 seconds for target temperatures
from 120 to 300°F (50 to 150°C);
Minimum emissivity setting 0.5.
48 SERIES
0 6 F = 00 0 to 0 600°F**
1 5 F = 500 to 1500°F
2 5 F = 500 to 2500°F
0 3 C = 00 0 to 0 300°C**
0 8 C = 300 to 0 800°C
1 3 C = 300 to 1300°C
**High Resolution versions may require
higher response time settings.
Standard temperature ranges
available in each MODLINE 4
Series are listed below:
BLOCK A Series Designation BLOCK C Optical Resolution
Optical Resolution relates to the
circular area viewed (Spot Size) at
any given distance from the front
of the MODLINE 4. See diagram
and data below.
0 = Standard Resolution
1 = High Resolution
2 = Very High Resolution
BLOCK B Temperature Range
BLOCK B Temperature Range
(continued)
MODEL NUMBER
A
Series
Temp. Range Opt. Res. Output Enclosure
B C D E
1–5
BLOCK D Output
Standard Modline 4 output is
4-20mA, linear, corresponding
to the temperature range. Peak
Picker is optional (standard with
Series 22).
0 = 4 to 20 mA
1 = 4 to 20 mA with
Peak Picker
BLOCK E Enclosure
Standard Enclosure is an
aluminum casting with NEMA 4
rating (Series 43 through 48).
Water-cooled Enclosure has a
built-in air purge.
0 = Standard Enclosure
1 = Water-cooled Enclosure
Please note: A “9” in any
block means the instrument
has been specially modified.
Refer to Section 1.7 for
details of the modification.