27
Parameter
Description
GevCurrentIPconfiguration
DHCP
Enable DHCP function.
When setting
GevCurrentIPconfigurationDHCP
to
True
, you can
set the IP address in DHCP mode. In this case, the IP address can be
automatically obtained.
GevCurrentIPconfigurationP
ersistentIP
Static IP function.
When setting
GevCurrentIPconfigurationPersistentIP
to
True
,
you can set the IP address in static mode after the device is
powered on.
Priority: Static IP
＞
DHCP
＞
LLA.
GevCurrentIPAddress
IP address of the current device.
GevCurrentSubnetMask
Subnet mask of the current device.
GevCurrentDefaultGateway Gateway of the current device.
GevIPConfigurationStatus
Displays the method that the IP address is allocated: LLA, DHCP or
static IP.
GevFirstURL
Acquires the first URL address of GenICam XML.
GevSecondURL
Acquires the second URL address of GenICam XML.
GevNumberOfInterface
Displays the number of logic channels that the device supports.
GevPersistentIPAddress
Static IP address of the device.
GevPersistentSubnetMask
Subnet mask of device static IP.
GevPersistentDefaultGatew
ay
Gateway of device static IP.
GevMessageChannelCount
Displays the number of message channels that the device
supports.
GevStreamChannelCount
Displays the number of streaming channels that the device
supports.
GevHeartbeatTimeout
Heartbeat timeout period.
GevTimestampTickFrequenc
y
Frequency of timestamp.
GevTimestampControlLatch Latch the current timestamp into
GevTimestampValue
.
GevTimestampControlReset Used to reset the internal timestamp.
GevTimestampValue
Used to store the latched timestamp.
GevGVCPExtendStatusCode
sSelector
The version of
GigE Vision
for extended status code output.
GevGVCPExtendStatusCode
s
Outputs extended status code or not.
GevGVCPPendingAck
Reports to Pending_ACK or not when command timed out.
GevGVCPHeartbeatDisable
Disable heartbeat detection of GVCP.
GevGVCPPendingTimeout
Timeout period of GVCP command execution.
