12
FrameBurstStart
: Multi-frame mode of frame trigger mode. Outputs multiple images according
to the define line height after receiving a trigger signal rising edge (falling edge). The number of
images depends on the value defined in
TriggerFrameCount
.
FrameBurstStart
Figure 3-12
Line + frame trigger: When there are multiple trigger signals, you can enable frame trigger and
line trigger at the same time, so that the images fit the application environment and the law of
object motion.
3.4.2
Trigger Source
Software trigger: Select
Trigger Software
from
AcquisitionControl > TriggerSoftware
to send
trigger signals manually through the software.
I/O trigger: The trigger signal enters the camera from external devices through the I/O interface.
For the specific wiring of the camera I/O interface, see the electrical specifications of the camera.
As shown in the figure below, set
TriggerSelector
to
FrameBurstActive
,
TriggerMode
to
On
,
TriggerSource
to
Line2
, and
TriggerActivation
to
LevelHigh
. After completing the
configuration, wire line 2 according to the cable specifications. After that, images can be
generated after receiving signals.
Line scan camera trigger source
Figure 3-13
