iRay Technology Mars1417X User Manual Download Page 68

Page: 68 / 86

Wireless Digital Wireless Digital Flat Panel Detector Mars1417X

The firmware upgrade package may contain firmware of several units: ARM, FPGA, MCU.

Mars1417X_IMAGE_44_ALL_20XX_XX_XX.ifrm

Word “ALL” indicates the file contains the firmware upgrade file for all units.

Mars1417X_IMAGE_44_ARM_20XX_XX_XX.ifrm

Word “ARM” indicates the file is only for ARM.

Mars1417X_IMAGE_44_FPGA_20XX_XX_XX.ifrm

Word “FPGA” indicates the file is only for FPGA.

Mars1417X_IMAGE_44_MCU_20XX_XX_XX.ifrm

Word “MCU” indicates the file is only for MCU.

User can choose one of these files as required to start the upgrade.

Choose the file that needs to be upgraded, and must check the package info to confirm if it is

correct.

User Manual of Mars1417X

Summary of Contents for Mars1417X























































































Search results

Summary of Contents for Mars1417X

Reviews:

Related manuals for Mars1417X

Brands by name

Popular brands

iRay Technology Mars1417X, User Manual

Search results

Summary of Contents for Mars1417X

Reviews:

Related manuals for Mars1417X

Brands by name

Popular brands