background image

2

About This User Manual

Congratulations on your purchase of this IQAir high-performance air cleaning system. Please study this user manual
carefully to familiarize yourself with the special features and functions of your IQAir system and keep it in a safe place
for future reference.

Read these instructions before using the air cleaner:

Do not use this air cleaner as sole protection against harmful pollutants.

Do not immerse the air cleaner in water or other liquids. 

Always disconnect the power from this air cleaner by unplugging the power cord before adding or removing parts
and before cleaning.

Do not operate this air cleaner if it has a damaged cord or plug, if the motor fan fails to rotate, if it is not working
properly, if it has been dropped or damaged, or dropped into water. 

If the power cord of this air cleaner should become damaged, it may be replaced with a similar two-pole cord, as
is commonly used for computers and similar appliances. Replacement cords are available from IQAir.

Only use this air cleaner for its intended purpose of air cleaning in non-industrial environments.

Do not use this air cleaner in areas with very high concentrations of dust or powder to prevent the danger of dust
explosions.

Do not use this air cleaner in explosive areas.

Do not use attachments or filters not recommended by IQAir.

Do not use outdoors.

Do not obstruct the air inlet and air outlet of the air cleaner. 

Do not place the air cleaner on a soft surface such as a bed or other soft furnishings.

Only use this air cleaner in an upright position.

Do not place next to a humidifier.

Keep the power cord away from heated surfaces.

Save these instructions for future reference.

Important Safety Instructions

The IQAir Group reserves the right to change specifications contained in this document at any time and without prior notice.

© 2002-2013 The IQAir Group.  All rights reserved. IQAir is the registered trademark of The IQAir Group.  EvenFlow is a trademark of The IQAir Group. IQAir systems

and filters are protected under U.S. patents 6 001 145 and 6 159 260. Other U.S., 

European and Asian patents pending. 

Summary of Contents for Cleanroom H 13





























Reviews: