background image

14

Chapter 4

– Using the Control Panel

4.4.5  Timer ON/OFF Fan Speed Selection Menu

The Timer ON/OFF Fan Speed Selection Menus allow the setting of two different
fan speeds for two different time periods (referred to as Timer ON period and
Timer OFF period). For the Timer ON period you can select fan speeds 1 to 6. For
the Timer OFF period, you can select fan speeds 0 (OFF) to 6.

1.

To reach the Timer ON Fan Speed Selection Menu from the main display
window, press the 

Menu

key four times.

2.

Press and hold the 

Enter

key until the black cursor appears. 

3.

Press the 

p

key to select the desired speed for the Timer ON period.

4.

Press the 

Enter

key to confirm the chosen speed and to exit the enter mode.

5.

To set the Timer OFF period fan speed, press the 

Menu

key one more time.

Press and hold the 

Enter

key until the black cursor appears and adjust the

Timer OFF fan speed as above. The final 

Enter

command saves the selection

and exits the enter mode.

4.4.4  Day-of-the-Week Timer

The Day-of-the-Week Timer allows the deactivation of the Timer ON period on
certain days of the week. In its default setting the Timer ON period is enabled on
all seven days of the week. This is indicated by stars below the abbreviations of
the days. On days without a star the air cleaner will be running at the speed
which is set in the Timer OFF Speed Selection Menu (see 4.4.5).

Note:

At least one day of the week must be activated with a star to enable the

Auto Timer. If the timer is disabled on all days of the week, the timer status field
in the Auto Timer Menu will switch to OFF and the timer will be disabled.

1.

To reach the Day-of-the-Week Timer Menu from the main display window,
press the 

Menu

key three times.

2.

Press and hold the 

Enter

key until the cursor appears. 

3.

Press the 

p

key to activate (star) or deactivate (no star) the Timer ON period

on a particular day. Press the 

Enter

key to proceed to the next day.

4.

Repeat the same procedure until the timer has been activated/deac ti va ted
on the desired days. The final 

Enter

command exits the enter mode.

Summary of Contents for Cleanroom H 13





























Reviews: