Vertiq 8108 150Kv
Flash Firmware
Disconnect motor from your application and remove props
Open the IQ Control Center and connect your module (see section 2 for download instructions)
Navigate to the “Firmware” tab
Click the “Select Firmware Binary (”.bin”)” button
Navigate to and select the ”.bin” file that you downloaded
Keep the motor plugged in and select the ”Flash” button
WARNING: The flashing process takes a number of seconds. Do not unplug power or communication
while the motor is flashing as this could lead to a bricked or difficult to recover motor.
9
Safety Instructions
IQ motor modules and the machines they actuate can be dangerous and cause bodily harm. Please
use caution when working with motors.
Plugging the power wires from the battery into the module incorrectly can cause a spark or a fire. This
will result in damage to the motor, controller, and other vehicle components, and may cause bodily
harm.
Please keep hands and fingers clear of the motor and machine during operation.
While spinning the module with a propeller, please keep a safe distance and use appropriate eye and
ear protection. Contact with a spinning propeller can cause severe bodily harm. Always disarm all
motors before approaching your vehicle.
Please exercise caution when changing motor settings and PID gains.
In particular, disabling or
changing built-in limits (e.g. temperature limit, max current limit, velocity redline, etc.) can be
dangerous and cause irreparable damage to the module.
The modules may get hot during operation. Do not touch a module immediately after operation as it
may cause a burn.
While piloting a drone, please follow all federal and local regulations regarding the operation of Small
Unmanned Aircraft Systems.
10
Revision History
Table 1: Revision History
Version
Date
Changes
1.0
2021-10-25
Initial Version
10
REVISION HISTORY
V1.0
©
2021 IQinetics Technologies Inc.
