17/06/2022
IPMIT304
17
A strong password consists of at least six characters (and the more characters, the
stronger the password) that are a combination of letters, numbers and symbols. This
can be the same as the existing WiFi network or unique to the repeater.
Timing
allows for a timed reboot or interval for the IPmitter.
Select
Next
to confirm settings.
3. Enter the LAN Settings for the IPmitter.
IP Mode
can be set to either GHCP, static or DHCP. GHCP is set as standard, and
will receive an address (similar to DHCP, but will also assign another IPmitter
connected to an available address), static IP address is a unique fixed address
which you can assign to the IPmitter. DHCP will obtain the address from the DCHP
server or the router and assign IPmitter with an address from the network.
LAN IP
is a unique local IP address of the IPmitter that identifies the device on the
local area network.
Subnet
is the number that defines a range of IP address that can be used on the
network. This should match other devices on the network. The most common subnet
mask is 255.255.255.0
Gateway
(or default gateway) is a router address connected to the local network that
sends packets out of the local network. This is normally the local IP address of the
router.
Primary DNS
is usually the Gateway (router's) local IP address.
Secondary DNS
another DNS server address
