Browser Interface
© 2022 System Q Ltd
16
Lock BSSID
is the Mac Address of the device being connected to, this field is
completed automatically.
Encryption
is the type of Wireless Encryption used to access the WiFi network.
Password
is the password used to access the WiFi network.
Bandwidth
is the broadcasting bandwidth which this wireless network uses. This
needs to set to match your router/ WiFi Bandwidth.
Pass through
is set to off as default, may need to be enabled for network data
(Internet traffic) at the repeater end.
Select
Next
to confirm settings.
2. Enter the WiFi settings for the repeater.
WiFi Status
controls the WiFi on the repeater. When used purely as an IP camera
bridge then it is recommended to leave this option off. When enabled the repeater
will broadcast its own WiFi network as well as the existing WiFi network.
SSID
sets the name of the WiFi network you will see broadcast at the repeater. This
can be the same as the existing WiFi network or unique to the repeater.
Hide your WiFi name?
Enable so that when a wireless device searches the area
for the networks it will not be able detect the WiFi name.
WiFi Password
is the password used to access the Repeater WiFi network.
