iPhone iSAPPOS 4, User Manual

Page: 27 / 40

Good Read Delay
This sets the minimum amount of time before the scanner can read another barcode . De -
fault = 0 ms (No Delay).
If you want to set your own length for the good read delay, scan the barcode below, then
set the delay (from 0-30,000 milli- seconds) by scanning digits barcodes at the end of this
chapter, then scanning Save.
Manual Trigger Mode
When in manual trigger mode, the scanner scans until a barcode is read, or until the trig -
ger is released.
26