UM122TW
/
UM622TW
UDM10012
38
O
PERATING
I
NSTRUCTIONS
The RSA 2024-SB comes fully adjusted from the factory for most processing conditions. Certain
conditions may require adjustments or fine turning of the machine and air pressure to provide
optimal performance.
1. Balancing the Top Tape Head Box (After Case Exits Machine)
When the machine is in Automatic mode and running with no case introduced, the Top Tape
Head Box should remain stationary. If it floats up or down, the balance gauge needs to be
adjusted (
Refer to Page 28
). Increase the pressure to stop the
ascent
of the Top Tape Head
Box. Reduce the pressure to stop the
descent
of the Top Tape Head Box. After balance
adjustment, process case and verify that the Top Tape Head Box remains stationary. If it still
floats up or down, continue adjusting and processing until the balance reaches a stationary
state.
2. Void/Overfilled/Fragile Cases
For overfilled cases:
The RSA 2024-SB comes with a box overfilled feature to compensate for overfilled boxes to
seal properly. To suit your case sealing need, this feature requires adjustments (See Below).
To adjust the overfilled case device locate the knob underneath the E-Stop button on the Top
Tape Head Box (Refer to
Figure-14
for E-Stop location). Adjust counterclockwise to exert
pressure on the lower detect flag (
Fig. 29B
) conforming overfilled cases fully close when
processing, see
Figure 29A
for knob location.
A
B
Figure-29
Sensing Paddle
Sensing Paddle
Pressure Adjustment
Knob
Summary of Contents for RSA 2024-SB
