IPG RSA 2024-SB, Operations Manual & Parts List

Page: 27 / 117

UM122TW / UM622TW UDM10012
27
S
ET
-U
P
P
ROCEDURES
6. Connecting Utilities
a. Electrical
A twelve foot (12’) standard three conductor power cord with plug is provided for 110V, 60 Hz,
15 amp electrical service. The receptacle must be properly grounded. Before the machine is
plugged into the receptacle, ensure that all materials are removed from the machine. The
electrical control is protected with an automatic circuit breaker with resettable overload.
The electrical control box (
Figure-11 ) is located on the side of the Case Sealer for
customer convenience. The Electric Box contains a Power Switch Disconnect to prevent
the use of the machine during maintenance. The machine will not start unless the Power
Switch Disconnect is turned to “ON”. To open the electric Box, turn the Power Switch to
the “OFF” position, and use a slotted screwdriver and turn it clockwise to open the door.
When opening the door of the electrical box, the door handle should stay in the electrical
box disconnect switch (
Figure-12 ). In order to close the electrical box door again, align
the switch arm with the handle in the door.
Figure-11
Figure-12