press Enter for 5sec to make a factory reset
configuration of the PT100 sensors
2-4.L: 2- or 3-wire sensors / 3.L: 3-wire sensors
output 1 configuration
switching point / release position
switching point / hysteresis
window function / release position
window function / with hysteresis
output 1 off
switching mode S1
turn-on delay S1
turn-off delay S1
output 2 configuration
output 2 = S2
output 2 = error signal
output 2 = analog
output 2 off
switching mode S2
turn-on delay S2
turn-off delay S2
see analog menu
max. peakvalue
delete
min. peakvalue
delete
offset setting (±10%)
display damping (peak-hold-time)
function display
rotate display
peak-hold
rotate and peak hold
standard display
press Enter for 5sec
test function (no timeout)
end of enhanced functions
2. level
MANUAL • Subject to alteration! Version:
June 2017
ipf electronic gmbh • Rosmarter Allee 14 • 58762 Altena
│
Tel +49 2351 9365-0 • Fax +49 2351 9365-19
│
[email protected] • www.ipf-electronic.com
7
