IPC CT46, Operator'S Manual, Page: 31 / 34

EN
Six monthly operations
Have the machine checked by personnel trained and authorised by the manufacturer.
Maintenance
The following table specifies the role responsible for each procedure. The following table specifies the role responsible for each procedure.
O = Operator O = Operator
A = personnel trained and authorised by the manufacturer.
Interval Responsible Description Procedure Lubricant/Liquid
Daily
O
Pad
Check, rotate or re
-
place
O
Brush/es
Check and clean
O
Squeegee Clean and check for
wear or damage
O
Spray shield Check for wear or
damage
O
Dirty water tank
Empty, rinse, clean
float guard and waste
basket
O
Solution tank
Empty, rinse
O Batteries Recharge if needed
Weekly
O
Batteries Check the electrolyte
level
DW
O Battery compartment Check for leakage
O
Squeegee assem-
bly siphon (two-disc
model)
Check. Clean
50 hours
O
Dirty water tank lid
gasket Check for wear
O
Detergent tank filter
Remove and clean
200 hours
O
Batteries, terminals
and cables
Check and clean
A
Steering chain
Lubricate, adjust ten
-
sion and check for
wear or damage GO
A
Steering cable
Check tension. Check
for wear or damage
750 hours
A
Suction motor Replace the brushes
1250 hours A Drive motor Replace the brushes
A
Brush motors Replace the brushes
LUBRICANT/LIQUID LUBRICANT/LIQUID
DW Distilled water DW Distilled water
ACD Approved commercial detergent
ACD Approved commercial detergent
GO SAE W90 gear oil
GO SAE W90 gear oil
31