Wireless N150 Long Range AP/Router
29
3.4 DHCP
The Dynamic Host Configuration Protocol (DHCP) is an automatic
configuration protocol used on IP networks. If you enable the built-in DHCP
server on this device, it will automatically configure TCP/IP protocol settings
for all DHCP-Client-enabled PCs in your LAN (Namely, PCs are set to "Obtain
an IP address automatically" and "Obtain DNS server address automatically"),
including IP address, subnet mask, gateway and DNS etc, eliminating the
need for manual intervention.
DHCP Server:
enable or disable the device’s DHCP server feature. If
enabled, the DHCP server will assign IP addresses to requesting clients.
Start IP Address:
Specify the starting IP address for the DHCP server
IP assignment.
End IP Address:
Specify the ending IP address for the DHCP server IP
assignment.
Primary DNS Server:
Specify a primary DNS address for requesting
clients.
Secondary DNS Server:
Specify a secondary DNS address for
Summary of Contents for P115AP
