Wireless N150 Long Range AP/Router
24
Chapter 3 Network Setup
This chapter mainly explains LAN settings in AP Mode, Universal Repeater
Mode and Router Mode, as well as WAN settings, MAC Clone, DHCP server and
WAN Medium Type (Wired or Wireless WAN).
3.1 LAN Settings
IP Address:
Device's LAN IP address, 192.168.2.1 by default. You can
change it according to your needs; just remember to use the new one to
log on to the device’s web utility if you changed it.
Subnet Mask:
Device’s
LAN subnet mask, 255.255.255.0 by default.
Note:
If you change the device’s LAN IP address, you must use the new
one to log on to the web-based configuration utility. To synchronize
system time in AP Mode and Universal Repeater Mode, make sure your
device's LAN IP address is on the same net segment as the uplink device,
and set gateway and DNS addresses the same as uplink device's IP
address.
3.2 WAN Settings
WAN settings are only available in Router Mode.
Summary of Contents for P115AP
