Wireless N150 Long Range AP/Router
43
Place and hold the device in different places for a certain period of time (5
seconds is recommended), observe signal strength change from the graph.
Position device exactly where as it is when strongest signal appears on the
graph.
Note:
1. The smallest signal strength absolute value on vertical axis indicates best
signal strength.
2. When you have positioned the device ideally for bridge, remember to
disable the
Optimum WDS Position
function. So it may not affect your
wireless performance.
4.5 Advanced Settings
This section allows you to configure advanced settings, including AP Isolation,
Beacon interval
，
Fragment threshold
，
RTS threshold and DTIM interval, etc,
for your wireless networks.
AP Isolation:
Isolates clients connecting to master SSID.
Beacon Interval:
A time interval between any 2 consecutive Beacon
packets sent by an Access Point to synchronize a wireless network. Do
NOT change the default value of 100 unless necessary.
Fragment Threshold:
Specify a Fragment Threshold value. Any
wireless packet exceeding the preset value will be divided into several
Summary of Contents for P115AP
