IP-COM In-wall AP Series, User Manual

Page: 80 / 106

73
Parameter Description
Read/Write
Community
It specifies the read/write password shared between SNMP managers and this
SNMP agent. The default password is
private .
The SNMP agent function of the AP allows an SNMP manager to use the password
to read/write variables in the MIB of the AP.
7.2 Example of Configuring the SNMP Function
Networking requirement
−
The AP connects to an NMS over an LAN. This IP address of the AP is
192.168.0.254/24 and the IP address of the NMS is 192.168.0.212/24 .
−
The NMS use SNMP V1 or SNMP V2C to monitor and manage the AP.
Configuration procedure
Configure the AP
Assume that the administrator name is Tom , read community is Tom , and read/write
community is Tom123 .
1.
Log in to the web UI of the AP and choose SNMP .
2.
Set SNMP Agent to Enable .
3.
Set the SNMP parameters, Administrator , Device Name , Location , Read Community and
Read/Write Community .
Internet
Router
PoE switch
AP
192.168.0.254/24
NMS
192.168.0.212/24
LAN
WAN