IP-COM In-wall AP Series, User Manual

Page: 67 / 106

60
6.5 Access Control
6.5.1 Overview
The access control function enables you to allow or disallow the wireless devices to access
the wireless network of the AP based on their MAC addresses.
The AP supports the following 2 filter modes:
−
Allow : It indicates that only the wireless devices with the specified MAC addresses
can access the wireless networks of the AP.
−
Disallow : It indicates that only the wireless devices with the specified MAC
addresses cannot access the wireless networks of the AP.
Access Control is disabled by default. The following figure displays the page when Access
Control is enabled (
Allow is taken as an example).
Parameter description
Parameter Description
SSID It specifies the wireless network to which the rule applies.
MAC Filter Mode
It specifies the filter mode of the rule.
−
Disable : It indicates that the access control function is disabled.
−
Allow : It indicates that only the wireless clients on the wireless access control
list can connect to the AP with the selected SSID.
−
Disallow : It indicates that only the wireless clients on the wireless access
control list cannot connect to the AP with the selected SSID.
Wireless client list
Wireless access control list