15
Parameter description
Parameter
Description
Device Name
It specifies the name of the AP.
A unique AP name helps quickly identify the AP. You can change the AP name on
the
Network
Settings
>
LAN Setup
page.
Uptime
It specifies the time that has elapsed since the AP was started last time.
System Time
It specifies the current system time of the AP.
Firmware Version
It specifies the firmware version of the AP.
Hardware Version
It specifies the hardware version of the AP.
Number of Wireless
Clients
It specifies the number of wireless clients currently connected to the AP.
MAC Address
It specifies the physical address of the LAN port of the AP. If you connect the AP to
other devices using Ethernet cables, the AP uses this MAC address to
communicate with those devices.
IP Address
It specifies the IP address of the AP and it is also the management IP address of
the AP.
The web UI of the AP is accessible by visiting this IP address. You can change the IP
address on the
Network
Settings
>
LAN Setup
page.
Subnet Mask
It specifies the subnet mask of the IP address of the AP.
Primary DNS Server It specifies the primary DNS server of the AP.
Secondary DNS
Server
It specifies the secondary DNS server of the AP.
Summary of Contents for In-wall AP Series
