3
QUICKSTART GUIDE
o
Make sure that the items listed below are included in the box:
QUICK PLAY LP
CD
USB
cable
Slipmat
Quickstart Guide
Safety Instructions & Warranty Information
o
READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT
o
Go to
http://www.ionaudio.com
for product registration.
INTRODUCTION
You should install EZ Vinyl/Tape Converter to take advantage of
computer recording. EZ Vinyl/Tape Converter is the quickest and
easiest way to turn your recordings into digital media. EZ Vinyl/Tape
Converter conveniently saves your recordings in your iTunes*
library. We have included a handy software Quickstart Guide with
step-by-step instructions on software installation and operation.
To install the software: simply insert the included CD into your computer and follow the on-screen instructions. After you finish
converting your vinyl, you can then burn to CD or load onto portable media devices.
Visit
www.ionaudio.com/computer-optimization
for more information on optimizing your computer for audio.
* iTunes is a trademark of Apple, Inc., registered in the U.S.A. and other countries.
FEATURES
1.
USB Cable –
Use the included USB Cable to connect
your turntable to your computer. The USB connection
will provide power to the turntable as well as the audio
from the turntable to your computer. For transferring
your vinyl records to your computer, we have provided
software on the included CD.
2.
Line Out –
Use a standard stereo RCA cable to
connect these outputs to the audio inputs of your
home stereo system. (Please note: you can still copy
music to a CD or to your computer even if the audio
outputs of the turntable are not connected to a stereo
system).
IMPORTANT WARNING: The RCA outputs are
LINE-level. Please only connect these outputs to
LINE-level inputs. You may damage your receiver
if you plug in a LINE-level into a PHONO input.
3.
Platter –
Place your slipmat and record here.
4.
Tonearm –
QUICK PLAY LP comes with a ready to
use pre-balanced tonearm and cartridge. The
tonearm can be raised and lowered by hand, or by
pressing the raise / lower lever. Please note that the
tonearm needs to be moved away from resting
position (on the arm clip) for the turntable motor to
activate. When the tonearm is placed back in its
resting position, the turntable motor will deactivate.
5.
Arm Clip –
This specially designed arm clip secures
the tonearm while at rest or when not in use. The arm
clip has been designed to remain in the up position
while unlocked.
6.
Raise / Lower Lever –
Raises and lowers the tonearm.
7.
Autostop –
This switch turns autostop on or off. When autostop is on, the platter will start spinning when the tonearm is
placed over the record and stop spinning when the record has reached the end. (When autostop is off, the platter will
always spin regardless of the position of the tonearm.)
Note:
If your record stops before a song is done playing, set the Autostop Switch to "off."
8.
33 / 45 / 78 RPM Switch –
This switch controls the RPM of the turntable platter.
IMPORTANT:
Remove the plastic cartridge cover (needle
cover) before operating the turntable.
1
2
3
4
5
6
8 7
Visit
www.ionaudio.com/ezvc
to download the
latest version of EZ Vinyl/Tape Converter
software or for helpful troubleshooting guide and
additional support.
