22
6.
Press PLAY. The display says
COPY DONE
.
7.
Release the COPY and PLAY buttons.
3.3C
Copy a Single Drum Pad's Part to a Drum Pad in a Different Pattern
This copy function
merges
the source drum pad rhythm with the destination drum pad rhythm in a
different Pattern. To
replace
the destination rhythm with the source rhythm, first erase the destination
pad rhythm to be replaced (section 3.2C).
1.
The IED04 should be in Pattern mode and stopped.
2.
Select the Pattern containing the drum part to be copied.
3.
Press and hold the COPY button, and keep holding it down until step (8). The display says
COPY TO
PATT
.
4.
Enter the destination Pattern number to which the drum part should be copied.
5.
Strike the pad containing the part to be copied. The display will show the drum number (such as
D2
if
you hit pad 2).
6.
Strike the destination pad to which the source part will be merged. Often when copying to a different
Pattern, this will be the same drum pad number as selected in step (5). As long as COPY is held down,
the destination pad can still be changed by selecting another drum pad.
7.
Press PLAY. The display says
COPY DONE
.
8.
Release the COPY and PLAY buttons.
Summary of Contents for iED004
Page 1: ...Reference Manual iED04 Digital Drum Station...
Page 2: ......
