Iomega px4-400d User Manual Download Page 17 | Manualshive

Page: 17 / 168

background image

3. Use the included power adapter and cord to plug the px4-400d into a surge-protected power

source.

4. Your px4-400d should power on automatically.

5. To set up your px4-400d, open a web browser and go to http://setup.lenovoemc.com, or enter the

device IP address or the model name "px4-400d" in your computer's web browser. Device Setup
will launch automatically the first time you access your px4-400d and guide you through
configuring basic setup options.

On a Mac use "local.px4-400d" to access Device Setup using the model name. For best results,
use a computer that is connected to the same subnet or network segment as the px4-400d. If
Device Setup doesn't launch, see

Accessing Your Device If It's Not Discovered

.

6. OPTIONAL: if desired, install the LenovoEMC Storage Manager and Twonky Media Server

software.

LenovoEMC Storage Manager will automatically scan your network and connect to available
Shares on the px4-400d.

Installing the Twonky Media Server software enables you to manage media aggregation on your
client computer.

Mac Users: When you install LenovoEMC Storage Manager, its icon will appear on the Menu
Bar. Shares on the px4-400d will mount and appear on the Mac Desktop.

NOTE: If the px4-400d Shares do not appear on the Mac Desktop, open Finder Preferences and
check Connected Servers under "Show these items...". You can also find the Shares listed
under Shared when you open a Finder window.

PC Users: When you install LenovoEMC Storage Manager, its icon will appear in the System
Tray. Shares on the px4-400d will automatically be assigned a drive letter and will be available in
the Network section in Windows Explorer or under Computer Network Locations.

If you receive a message from your operating system's firewall alerting you of network activity
while installing the software, be sure to unblock communications.

If you do not install the LenovoEMC Storage Manager, see

Discovering the px4-400d Using Your

for information on how to manually connect Shares on the device.

Setting up Your px4-400d Network Storage

Connecting the px4-400d to Your Network

7

«
...
15
16
17
18
19
...
»

Summary of Contents for px4-400d









































































































































































Reviews:

No comments

Related manuals for px4-400d

Brand: D-Link Pages: 12

Brand: Vanguard Pages: 4

Brand: E-TOP Pages: 76

Brand: Draytek Pages: 8

Brand: Juniper Pages: 7

Brand: Belkin Pages: 2

Brand: MEDIATEK Pages: 166

Brand: TRENDnet Pages: 12

Bluespoon 17-1000

Brand: Radio Shack Pages: 1

Brand: BinTec Pages: 34

Brand: Loopcomm Pages: 2

airHaul Nexus sB3010

Brand: SmartBridges Pages: 80

Brand: Chaparral Pages: 96

Brand: AMC Pages: 28

Brand: Matrix Switch Corporation Pages: 60

Brand: Cleerline Pages: 2

PROM Programming Adapters PCA7438F-64A

Brand: Renesas Pages: 18

Brand: Wistron NeWeb Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands