Iomega px4-400d User Manual Download Page 22 | Manualshive

Page: 22 / 168

background image

Setting Up Additional Features

After completing device setup, you may want to configure additional features of your px4-400d. Refer to
the sections under Device Configuration Options for information on configuring many basic features.
More complex features are covered by other sections of this manual.

LenovoEMC Personal Cloud

You can set up a Personal Cloud to allow invited users access to content on your px4-400d. This content
can be in private Shares that are exclusive to the users who join the Personal Cloud, which adds an
additional layer of security. In addition, you may want to join other trusted devices to the Personal Cloud,
so that content on those devices can be made available to Personal Cloud users. For more information
about Personal Cloud, refer to the

Personal Cloud overview

.

File Sharing

Setting up File Sharing enables you to add content to your px4-400d and make it available in a wide variety
of ways, including content features such as Active Folders and media sharing. For more information, refer
to the

Sharing Overview

.

Security is automatically enabled when you setup your px4-400d and all Shares are secured by
default.You can create users on your device and set access privileges as desired to limit data
access to Shares. You can also make Shares public if you want them to be accessible by
everyone. See

Securing Your Device

for more information.

Setting up Your px4-400d Network Storage

12

Setting Up Additional Features

«
...
20
21
22
23
24
...
»

Summary of Contents for px4-400d









































































































































































Reviews:

No comments

Related manuals for px4-400d

Brand: D-Link Pages: 12

Brand: National Instruments Pages: 5

Brand: National Instruments Pages: 76

Brand: National Instruments Pages: 34

EK-FB GA AX370 Gaming RGB Monoblock

Brand: ekwb Pages: 2

Brand: Dialogic Pages: 2

Brand: NEC Pages: 2

Brand: Qixiang Technology Pages: 16

Brand: M86 Security Pages: 309

Brand: 3Com Pages: 53

Brand: iNetVu Pages: 20

Brand: Planet Pages: 54

Brand: NetComm Pages: 65

Brand: COUGAR Pages: 2

TeraBridge 5845

Brand: Proxim Pages: 4

Brand: NetComm Pages: 75

Brand: Proscend Pages: 93

Meridian 1 Option 11C Mini

Brand: Meridian Pages: 546

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands