background image

xi

Warranty

This product is warranted against defects for a period of five (5) year from the date of original invoice. We will repair/replace the
product with no charge for parts or labor within this time. To obtain warranty service the product needs to be returned fright prepaid
by the customer with a copy of original invoice.  This warranty does not apply if in the sole opinion of Innovative Telecommunication
Technology LLC, the product has been tampered with or damaged by lightning or any other acts of nature, misuse, neglect or
unauthorized service.

EXCEPT AS SPECIFICALLY PROVIDED IN THIS AGREEMENT, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR
OTHERWISE,INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OR MERCHANTIBILITES OR FITNESS FOR A
SPECIAL PURPOSE. IN NO EVENT SHALL INNOVATIVE TELECOMMUNICATION TECHNOLOGY LLC  BE LIABLE FOR LOSS
OF PROFITS OR BENEFITS, INDIRECT, SPECIAL, CONSEQUENTIAL OR OTHERWISE ARRISING FROM ANY BREACH OF
THIS WARRANTY OR OTHERWISE.

             Problems 

Possible Cause /  Solution

 

Innovative Telecommunication Technology LLC

 1112 Montana Ave  Suite 250  Santa Monica, CA  90403 USA

 

 

http://www.invotel.com  Phone: 310-899-0078

10. 

Hold Music activates in
a conference call or
when two phones pick
up at same time

• 

If for any reason the hold music is activated
inadvertently, it can always be deactivated by pressing
the FLASH button in any setting.

• 

Conference calls can be done a better way: Press
FLASH,  you will get a dial-tone now dial the phone
number of the 2

nd

 party then press FLASH to join the

two calls together.

6. 

MOH works but audio
does not stop when call
is picked up in A1 or A3
settings.

• 

Wire distance to adapter is too long, Centralize  the
location of device to be as close as possible to all the
phones.  Try the A2 setting.

• 

If you are re-wiring  “daisy chain” wiring works better than
” star”  or “home run” or  Independent  wiring

• 

Press FLASH button to stop the music.

7. 

Some Phones work ,
some do not

  

• 

All your phones need to be similar model for activation
in 1 or 3 settings. If you mix different phone models,
Use the 2, or 3  settings. Refer to pages 4 or 5 for
more details.

8. 

Randomly  Hold music
starts to play by it self
or does not activate in
1, or 3 settings

• 

The call needs to be on Hold min. 2 sec. before  you
may pick it up.

• 

When you hang up,  wait 2 seconds before selecting
the same line again.

• 

Check for extra devices sharing  that line like Message
indicator, Answering machine, Alarm system, Modem
etc. Use a “privacy module” between the line and that
extra device to keep them off the line when line is
being used by your phone.

• 

Set your Alarm system and/or your DSL line to share
FAX line.

• 

Excessive wiring- Total wire length per line must be
under 500 feet  ( Ex: if you have 9 wall jacks -no matter
spare or a phone plugged in-  each connected via a
100 foot wire to a common point then your total wire
length is 9 x 100=900 feet )

• 

Use FLASH button to deactivate music.

9. 

Audio shuts off or
flickers

  

• 

Extensive audio volume. Lower  the volume to proper
level.

  

P11

Summary of Contents for SX8800-2LPE-AA












Reviews: