vi
Special Cases:
Some phones like
GE 2-9487GE2-A , GE 2-9488GE2-A
and all
RCA
phones beep every few seconds when
the calls are placed on Hold and may not work properly in position 3 settings ( the beep may turn off the Hold
Music in some cases)
in that case use the position 2 setting or use the 1 position settings and increase the volume a bit so that the
beeps are less noticeable to the callers.
If audio activates suddenly in position 3 settings , your lines may be “too powerful”
Try position 1 or 2
settings.
Digital Player Advanced Features:
USB Mp3 Player /repeater
Dual Banks
Single or multi tracks up to 99 tracks
External audio input
Tone Control, Bass Boost
Wall mount capability via two Keyholes
Package Content:
SX8800 unit
Power adapter 110/240v AC to 12v DC 200-500 ma
2 RJ-14 phone cords
User’s Manual
SD card 256 MB or Higher capacity
Adjusting Output VOLUME
If the On Hold audio volume is too low turn the VOLUME control clockwise; If it is too loud turn the VOLUME control
counter clockwise to desired level.
Connecting to a Computer:
Remove the SD card and insert it into an “SD card slot” normally found on most PC or laptops (use a USB
adapter in case the PC only has a USB port but not a SD card slot) or connect the player itself to a PC
USB port to access/update the SD card (the AC power adapter is not required in this case).
After you make the connection it will be detected as “Removable Disk” , when you open “My Computer” or
“Windows Explorer”
Transferring files into SD card:
Select the file you want to transfer to the SD card and drag-and-drop it into the “Removable Disk” that
represents this device (right click on the file, copy, move the mouse to the “Removable Disk” , right click
there and paste)
The player will play all the .mp3 files one by one before it auto repeats from the 1
st
file, You may silence
the .mp3 files you do not want to play by renaming them to “
file.ip3
” or just keep one .mp3 file in the SD
card, i.e. move or delete the extra files you do not want to play from the SD card.
When the file is being transferred to SD card allow several seconds for it to finish transferring before
removing the SD card.
If you have a new SD card with new production in it,
Remove the Power 1
st
then “press in” the old SD card
so it snaps out, insert the new SD card and make sure
it snaps in, Reconnect the power and the playback
automatically starts.
P6