21
select DMX start address
"d1"
to
"d512".
With the
"Up"
and
"Down"
buttons, you can
now set the desired start address.
MASTER/SLAVE-OPERATION:
Der
„VENTUS M“ kann mit weiteren Geräten verlinkt werden. Um ein Gerät als
„
Slave
“
einzustellen,
drücken Sie die Taste
„
Menu
“
bis im Display
„
Slav
“
erscheint. Bestätigen Sie mit der Taste
„
Enter
“
.
Wählen Sie am Master-Gerät das gewünschte Programm. Die zusammengeschalteten Geräte
arbeiten nun synchron.
DISPLAY INVERTING:
Press the
"Menu"
button until
"disp"
is displayed. You can now use the
"Up"
and
"Down"
buttons to select whether the display should be set for normal use
"dISP"
or for use via head
"d.SIP".
Confirm with the
"Enter"
key. The display can thus be adjusted so that it also displays correctly when the
head is mounted overhead.
3.3 Assignment of the DMX channels in the overview:
NOTE: Basic knowledge of the DMX512 control standard is required so that the device can be correctly
operated and programmed with a DMX controller.
4 Channel mode:
CH1
Laser-Effekt Motor
0-9
No Rotation
10-59
Laser-Motor forward rotation
(slow → fast )
60-69
Stop
70-119
Laser-Motor backward rotation
(slow → fast )
120-129
Stop
130-255
Laser-Motor forward- and backward-rotation
(slow → fast )
CH2
Derby-Effekt Motor
0-127
Stepless positioning.
128-255
Motor forward- and backward-rotation
(slow → fast )
CH3
0-9
Black out
10-19
Red
20-29
Green
30-39
Blue
40-49
White
50-59
Red+Green
60-69
Green+Blue
70-79
Blue+White
80-89
Red+White
90-99
Red+Blue
100-109
Green+White
110-119
Blue+Green+White
120-129
Red+Blue+White
130-139
Red+Green+White
140-149
Red+Green+Blue
150-159
All LEDs on.
160-169
Rainbow-Effect Group 1
170-179
Rainbow-Effect Group 2
180-189
Rainbow-Effect Group 3
190-199
Rainbow-Effect Group 4
200-209
Rainbow-Effect Group 5
210-219
Rainbow-Effect with Strobe Group 1
220-229
Rainbow-Effect with Strobe Group 2
230-239
Rainbow-Effect with Strobe Group 3
240-249
Rainbow-Effect with Strobe Group 4
