20
ON
If the silent mode "ON" is switched on, the light
beams of the unit switch off (BLACKOUT) if no
further music signals (bass impulses) are
received.
Infra
ON
IRC-Remote activated.
OFF
IRC-Remote de-activated.
Addr
4CH
4 channel DMX mode, then set the start address.
8CH
8 channel DMX mode, then set the start address.
Slav
Disp
Slav
Master / Slave operation. Define the device as
"Slave".
dISP
Display for normal use.
AUTOMATIC CONTROL:
Press the
"Menu"
button repeatedly until the display shows
"Auto".
Now the unit plays the automatic
program. Press
"Enter"
again to select
"AU-1"
to
"AU-7"
. With the
"Up"
and
"Down"
buttons, you can now set the desired automatic program.
MUSIC CONTROL:
Press
"Menu"
until
"Sound"
is displayed. Sound mode is activated. Press
"Enter"
again to
select sound program
"SO-1"
to
"SO-7".
With the
"Up"
and
"Down"
buttons you can now set
the desired sound program.
PROCEDURE OF THE PROGRAM:
Press the
"Menu"
button until
"SPED"
appears on the display. The flow rate menu is displayed. Press
"Enter"
again to select the speed
"SP-1"
to
"SP-9"
. With the "Up" and "Down" buttons you can
now set the desired speed of the program..
MICROPHONE SENSIVITY:
The sensitivity with which the headlamp reacts to the music signals (bass impulses).Press the
"Menu"
button
until the display shows
"Sens".
The microphone sensitivity menu is displayed. Press
"Enter"
again to
select the microphone sensitivity
"SE-1"
to
"SE-9".
With the
"Up"
and
"Down"
buttons, you
can now set the desired microphone sensitivity. The height is the value, the more sensitive the microphone reacts
to the music signals (bass impulses) in the environment.
SILENT-MODE:
The Silent mode refers to the music-controlled operation and is also known as Intelligent Sound Control. If the
silent mode is activated
"ON"
and the microphone of the device does not receive any music signals (bass
impulses), the light beams of the device switch off (BLACKOUT). If the silent mode is deactivated
"OFF"
, the
current program of the device will continue slowly, even if no further music signals (bass impulses) are received.
Press
"Menu"
until
"SILE"
is displayed. The menu for silent mode is displayed.
Press
"Enter"
again to select
"ON"
or
"OFF".
With the
"Up"
and
"Down"
buttons you
can now activate the silent mode
"ON"
or deactivate
"OFF".
IRC-CONTROLLING:
Press the
"Menu"
key until the display shows
"INFR".
The IR remote control menu is displayed. Press
"Enter"
again to select
"ON"
or
"OFF".
With the
"Up"
and
"Down"
buttons you can now
activate the IR remote control
"ON"
or deactivate
"OFF".
DMX-MODE:
To select the DMX mode and set the start address, press
"Menu"
button until the
"ADDR"
display
appears. Press
"Enter"
again to select
"4CH"
or
"8CH"
mode. Press
"Setup"
again to
