17
4.2 Cable remote control (X-2) (not included):
The device can be controlled with the cable remote control. Plug the cable remote control into the 5-pin connector
"Controller X-2" on the back of the device. (See section 4.1 Housing Backs).
1. Status LED:
Using the status LED, you can quickly see if your fog machine is ready for fogging or heating up.
2. Release Button:
Press the "FOG" button. The machine generates fog until you release the "FOG" button.
4.3 Remote control:
Your "Fume900DMX" is also equipped with a radio remote control. This makes this fog machine very flexible. A
receiver (W-2) and a transmitter (W-1) are included in the delivery.
Receiverer (W-2): Sender (W-1):
Status-LED:
Using the status LED, you can quickly see if your fog machine is ready for fogging or heating up.
Green = Ready, Red = Heating If you want to use the radio remote control for your "Fume900DMX", please pull the
antenna completely out to ensure a secure connection. The remote has a maximum range of 30 - 50m outdoors.
So you can use the "Fume900DMX" ideally also for theater or presentation purposes. Plug the radio receiver (W-2)
into the 5-pin socket "Controller W-2" on the back of the unit (see section 4.1 housing parts). Place the receiver so
that free reception is guaranteed. Prevent the receiver from being obscured by other devices. Otherwise, reception
errors could occur. The receiver has a magnetic plate, which means that it can also be found directly on the
"Fume900DMX".
There are four dip switches on the side of the receiver. Set one of the four dip switches to the "ON" position. The
numbered button of the transmitter "W-1" corresponding to the numbered dip switch controls the fog output.
Example: Set Dip Switch No. 1 to the "ON" position. The button 1 of the transmitter controls the fog output. If you
use 4 machines, they can be controlled separately from one transmitter.
1.
2.
