18
4.4 Timer Controller (D-800) (not included):
Via their three buttons, the strength of the fog, ejection time and intervals can be set and the functions of the device
can be optimally matched to the requirements of the user.
1.
DURATION
- Controller: This sets the duration of each fog output.
2.
INTERVAL
-
Controller: This sets the time intervals between the individual fog ejections.
3.
OUTPUT
-
Controller: This sets the amount of fog (0-100%).
4.
TIMER
-
Button: This activates the timer function.
5.
CONTINUOUS
-
Button: This will activate the continuous fog.
6.
MANUAL
-
Button: If the button is pressed, all other settings are deactivated and maximum fog output is
generated.
Part 5. Explanations for menu and display:
5.1. Set the DMX address:
1. Press MENU until the display shows ADDR.
2. Confirm with ENTER.
3. Use the UP / DOWN buttons to set the value of 001 - 512.
Remember, the machine needs 1 DMX channel! Channel 1 is the fog.
Note:
As soon as the device is connected to a DMX controller, the radio and cable remote control do not work!
DMX is the abbreviation for digital multiplex and allows the digital control of several DMX devices via a common
control cable.
Connect the DMX input of the unit to the DMX output of a DMX controller or other DMX device. Connect the output
of the first DMX device to the input of the second and so on to form a series circuit
DMX connectors:
A three-pin XLR socket serves as a DMX output, a three-pin XLR connector serves as a DMX input.
For installations with very long DMX cable paths or high electrical interference, such as in a discotheque, it is
recommended to use a DMX terminator. The DMX terminator is connected in an XLR connector as a 120
Ω resistor
between pins 2 and 3 which is plugged into the last output socket of the DMX line.
1. 2.
3.
4. 5. 6.
