18
18
AUDIO AND SUBTITLES LANGUAGE
Some TV broadcasters provide several audio channels
or subtitles information, carrying commentary in various
European languages, to accompany the TV image.
Press the ’’Audio/Subtitles” key on your remote control
to display all available audio channel options. Use
the directional keys on the remote control to make a
selection.
STANDBY MODE
You can put the receiver in standby mode to reduce the power consumption while the unit is not in use. The
standby mode turns off some parts of the receiver, but does not fully turn off the receiver, allowing it to start up
again very quickly when the unit is turned on. When in standby mode, the standby LED indication will be shown
on the front panel.
Note:
To reduce power consumption to zero, switch off the receiver using the power switch on the rear panel.
USB
Your digital receiver is equipped with 2 USB connections - one at the front panel behind the flap and one at the
back panel – however only one port is active at the time and the two ports cannot be used simultaneously. The
Built-in USB controller supports the USB 2.0 standard.
CONNECTING AN ExTERNAL USB 2.0 MASS-STORAGE DEVICE (I.E. ExTERNAL USB DRIVE)
When you connect a mass storage class device, the receiver will automatically show a message for the
initialisation of the device. If you want to use the other
USB port, you have to unmount the connected device
first. To unmount, press the Library key on the remote
control and then use the “Blue” or “Green” function key
to unmount the connected device.
Mounting mass storage devices allows the following
Recording and Playback features:
Time shift (Pause Live TV)
•
Record
•
Playback – of MPEG2/4 recordings, JPEGs and
•
MP3 files
Instant Replay
•
Note:
supported file systems - Fat16, Fat32, Ext2, and
Ext3.
