En
11
Decoder
Mux TS:
The transport stream comes from internal Mux functional block will be
delivered to the ASI output port on the back panel.
Program:
Under this sub menu, you will see all program names detected by
IDLV-5100P. The programs could be coming from ASI input, Tuner, TS/IP input,
the internal CI de-encryption block, BISS De-encryption block or MUX TS. Use
the <↑> or <↓>-key to roll up or down between the program names, and use
<←>-and <→>-key to switch among input sources, where a number in front of
the program name indicates the input source:
0-xxxxx displays the program name, which comes from ASI1 input; 1-xxxxx
from TUNER input; 2-xxxxx from TS/IP input; 3-xxxxx from the CI; 4-xxxxx from
ASI2 input; 5-xxxxx from BISS De-encrypted input; 6-xxxxx from MUX TS.
Video:
You can configure the video parameters of programs in this submenu.
Press the <ENTER>-key to confirm or press the <EXIT>-key to cancel.
Video Standard:
you can select Auto/1920x1080i 60/1920x1080i
50/1280x720p 60/1280x720p 50/720x480p 60/720x576p 50/525x480i
60/625x576i 50 for the composite video output.
Screen:
Select the screen mode: Auto, 4:3 Full, 16:9 Full or 4:3 Letterbox.
DVB Subtitle Lang:
Select the language of DVB Subtitle.
EBU Subtitle Lang:
Select the language of EBU Subtitle.
Subtitle Priority:
Configure the priority of Subtitle; choose whether DVB or
EBU should be first.
Fail Mode:
Choose which kind of picture will appear when signal is fail. You can
select Black Screen or No Sync or Still Picture.
Closed Caption:
Enable or disable the Close Caption function. This switch
controls both CC on CVBS and SDI.
VBI Mode:
Enable or disable the VBI. VBI option only controls Closed Caption
over CVBS. To activate the CC over CVBS, enable the VBI option.
CVBS Sub PAL:
Select PAL mode, including PAL-B/D/G/H/I, PAL-N, PAL-N_C
and SECAM.
CVBS Sub NTSC:
Select NTSC Mode, including NTSC-M, NTSC-M_J, NTSC-
M_443 and PAL-M.
Note:
The sub-menus VBI Mode, CVBS Sub PAL and CVBS Sub NTSC will
only show up when the Closed Caption option is on.
Audio:
You can configure the audio settings in the submenu
Audio1 Level: modify the audio1 level within this range: 0~99.
•
Audio1 Mode: select Stereo, Left, Right or Mono for soundtracks.
•
Audio1 Priority: select the priority of the audio.
•
Audio2 Level: modify the audio2 level within this range: 0~99.
•
Audio2 Mode: select Stereo, Left, Right or Mono for soundtracks.
•
Audio2 Priority: select the priority of the audio.
•
HDMI/AES Embeded:
select from PCM or Compressed. Select Compressed to
enable HDMI Dolby pass-through. Otherwise select PCM.
Mode:
select from Manual Selection and First Service. First Service means
to select the program no. automatically, normally the first program in the TS.
Manual Selection means to select the program manually.
A/V Alarm Switch:
There are two switches control the alarm separately:
Video Alarm: enable or disable the video alarm.
•
Audio Alarm: enable or disable the audio alarm.
•
ASI1
ASI1 Source:
There are 5 optional types for the signal source:
C
•
I De-encrypted: The de-encrypted transport stream received from the CI
functional block will be delivered to the ASI output port on the back panel.
TUNER: The transport stream received from Tuner block will be delivered to
•
the ASI output port on the back panel.
ASI1 Input: The transport stream received from the ASI1 input port will be
•
delivered to the ASI1 output port on the back panel.
ASI2 Input: the transport stream received from the ASI2 input port will be
•
Summary of Contents for IDLV-5100P
