12 Emergency firmware restore
In order to restore firmware after a failure, you need to:
1. Short out the RESET jumper.
2. Power the device and connect it to the LAN.
After the above steps, the device will set the following parameters:
–
Adres IP: 192.168.111.15
–
Maska IP: 255.255.255.0
Important!
To enter the 192.168.111.15 address, the IP address of the computer must
be in the same subnet (example IP address for the computer: 192.168.111.1). Changing
the computer's subnet is described in the chapter 6.2.
Referring to the specified IP address will give access to the device's bootloader.
Here we have the ability to upload firmware, reset the device to factory settings and
reboot it.
User manual RFID IND2
Page
60
of
61
[B01]
