◦
Toggle
– change output state to the opposite,
◦
On Period
– turn on the relay output for the time
Out Time
defined in
IO
Settings
tab,
◦
On Long Period
– turn on the relay output for the time
Out Time Long
defined in
IO Settings
tab,
◦
On User Period
– turn on the relay output for the time
Out User Time 1
.
•
Out User Time 1
– activation time of relay No. 1 for mode
On User Period
,
•
Out 2
– control of relay output #2:
◦
None –
skip,
◦
Off
– switch off relay output,
◦
On
– switch on relay output,
◦
Toggle
– change output state to the opposite,
◦
On Period
– turn on the relay output for the time
Out Time
defined in
IO
Settings
tab,
◦
On Long Period
– turn on the relay output for the time
Out Time Long
defined in
IO Settings
tab,
◦
On User Period
– turn on the relay output for the time
Out User Time 2
.
•
Out User Time 2
– activation time of relay No. 2 for mode
On User Period
,
•
LCD backlight
:
◦
None
,
◦
Off
– turn off display backlight,
◦
On
– turn on display backlight,
◦
Toggle
– change the state of illumination to the opposite,
◦
On Period
– turn on the backlight for a period of time
Lcd Backlight
defined
in
IO Settings
tab,
◦
Blink
– temporary blinking of the backlight.
•
LCD Text Timeout
– text display time on the display:
◦
0
– do not display text,
◦
-1
– display the text continuously, until the next message is called,
◦
>0
– duration of the message on the display given in seconds.
•
HTTP Client method
,
HTTP Content type
,
HTTP Client request
– settings for
sending an HTTP request – chapter 8.2.4,
•
MQTT
,
MQTT payload
– settings for sending an MQTT payload – chapter 8.3,
•
Log event
– logging an event if the RFID card is removed from the reading
range.
User manual RFID IND2
Page
36
of
61
[B01]