•
Subject
– message subject and the filename of the attachment file (logs),
•
Debug
– enable debugging (useful for detecting configuration errors),
•
Sending logs periodically
– file extension with which to send the log file as an
attachment,
•
Erase logs after send
– option to remove the logs if they are sent correctly,
•
Time
– frequency of sending logs in CRON format
(seconds, minutes, hours, day of the month, month, day of the week) - for the
syntax in the above screenshot: 0 0 0 ? * * * every day at midnight.
→
You can check the configuration of the email service by clicking on the Email test button.
The device will try to send a test message. The recipient should receive the email
immediately. Don't forget to check the SPAM folder.
If you face a problem with email transfer, enable DEBUG and open the page in a new
tab: IP/protect/dmesg.html by typing the address manually or clicking on the
Open
debug
link. Then press the
Email test
button. The debugger window will show
information providing an a closer look at the reason for the email sending problem.
User manual RFID IND2
Page
52
of
61
[B01]
