inveo IND2, User Manual

Page: 32 / 61

•
LCD text – the on-screen message displayed when the RFID card is not
recognized,
•
Sound :
◦
None ,
◦
Tick – short beep,
◦
Accept – acceptance sound,
◦
Reject – rejection sound.
•
Out 1 – control of relay output #1:
◦
None – skip,
◦
Off – switch off relay output,
◦
On – switch on relay output,
◦
Toggle – change output state to the opposite,
◦
On Period – turn on the relay output for the time Out Time defined in IO
Settings tab,
◦
On Long Period – turn on the relay output for the time Out Time Long
defined in IO Settings tab,
◦
On User Period – turn on the relay output for the time Out User Time 1 .
•
Out User Time 1 – activation time of relay No. 1 for mode On User Period ,
•
Out 2 – control of relay output #2:
◦
None – skip,
◦
Off – switch off relay output,
◦
On – switch on relay output,
◦
Toggle – change output state to the opposite,
◦
On Period – turn on the relay output for the time Out Time defined in IO
Settings tab,
◦
On Long Period – turn on the relay output for the time Out Time Long
defined in IO Settings tab,
◦
On User Period – turn on the relay output for the time Out User Time 2 .
•
Out User Time 2 – activation time of relay No. 2 for mode On User Period ,
•
LCD backlight :
◦
None – skip,
◦
Off – turn off display backlight,
◦
On – turn on display backlight,
◦
Toggle – change the state of illumination to the opposite,
◦
On Period – turn on the backlight for a period of time Lcd Backlight defined
in IO Settings tab,
◦
Blink – temporary blinking of the backlight.
•
LCD Text Timeout – text display time on the display:
◦
0 – do not display text,
◦
-1 – display the text continuously, until the next message is called,
◦
>0 – duration of the message on the display given in seconds.
•
Log event – enable event logging when an RFID tag is applied for control mode
via protocols.
User manual RFID IND2
Page
32
of
61
[B01]