13
Communications
• Each PROTRXion battery uses two female Tyco Electronics M12 connectors to support
signal communication with the host system.
• Communications are disabled until the battery is awake.
• Voltage, current, temperature, capacity, cycle count, state of charge, and fault codes can
be read from the battery using CANopen or J1939 communication. Communication protocol
of the battery is dependent on part number not model name.
• A signal interface is used as the communication interface between the battery and a connected
device.
If in doubt, please consult with
Inventus Power Technical Support
([email protected])
on further instructions on the signal
cable connections to the host system.
TE Connector P/N: T4131012081-000
