16
Battery State of Charge Indicator
There are (5) LED and one button on each module to be used for SOC and fault indication. To the
far left is the button followed by the LED to the right as shown in the figure below. The LED will
capable of representing a range for the remaining SOC. The LED will remain lit for 5 seconds after
the button is pressed before turning off unless the SOC is 10% or less than the first LED will blink
on and off for 10 seconds. The LED will come on when the following conditions are detected:
LED Indicator Status
Battery State of Charge
81 – 100%
61 – 80%
41 – 60%
21 – 40%
11 – 20%
1 to 10%
