42
Comments
-
since recipient's phone number is selected from the list of
friendly names, it is important to enter unique,
unambiguous names facilitating identification.
7.2.6.3.4.4. Calling time
Function
-
Length of connection
Data type
- List
List
-
Auto
Option used when GSM operator supports feedback on
proper identification of caller ID by receiving caller's
terminal.
5, 10, 20, 30 [s]
Options used when GSM operator does not support
feedback on proper identification of caller ID. Defined in
Recipient number parameter.
Default
value
-
Auto
Comments
- n/a
7.3. Configuration writing
After required modifications and parameter settings, the configuration is stored on the
configuring PC's hard disk only. In order to write it to the module memory, it has to be
transmitted to the module .
The method of transmission depends on whether we configure it locally or remotely via
GPRS. For local configuration, it is enough to secure a connection via RS-232 cable.
Detailed description of local configuration is to be found in the MTM user manual.
For remote configuration, it is vital that the computer running the configuration application
has access to the APN where the configured module resides. Detailed description of remote
configuration is to be found in the MTM user manual.
7.4. Verification of configuration
Despite high reliability of both local and remote module configuration, verify of it is
important. It is relevant if the module's behavior does not comply in accordance with the
performed configuration. For verification, please read the configuration from the module and
check parameters settings. Reading of module configuration is described in details in MTM
users manual.
8. Problem solving
8.1. LED signaling
On front panel of
MT-301/302/303/304
are three diagnostic LEDs located.
